The minefield of pressing tools. A beginner’s guide to getting tooled up

Press fit systems are a newer way of carrying out fittings and, when compared with more traditional solder and screwed methods, can save both time and cost in addition to many other benefits. In order to reap the benefits you’ll need to know how to use the tools to your best advantage.

Modern press-fitting systems use hydraulic press technology to provide a high-quality and easy-to-fit joint method. Even though it saves considerable amount of time, with more manufacturers coming on board, it can be difficult for first-timers to know where to start. 

With the help of Klauke UK, #TechTuesday will provide answers to the most popular questions a press-fitting novice might have about these increasingly commonplace systems.

Where to start – the right type of pipe

The first question you need to ask yourself: what will I be installing?
With more systems coming onto the market, selecting the right pipe type is key.
For more traditional methods you’ll have manufacturers of metal press systems, but plastic composite systems like Multipipe MLC is gaining popularity – these hybrid pipes are a great alternative to conventional methods which might struggle on specific jobs where flexibility and hygiene are key to a quality installation.

Where to start – the right type of pipe

All pipework systems in the UK are made to a BS EN standard, but depending on the manufacturer, these standards might differ.

BS EN 7291 – is the most common British standard for Plastic pipes
BS EN 21003 – is the multilayer (MLC) standard
BS EN 1057 – is the Copper tube standards

These standards dictate the manufacturing process, pipe dimensions and wall thickness, all of which are hugely important in selecting the right pressing jaws. To press a joint onto these systems, you’ll need a set of compatible jaws as different pipe and fitting manufacturers use different jaw profiles.

Selecting the right jaw profiles

These profiles manufactured to the pipe dimensions and the set of ridges inside the profile help to press down on the sleeve to get a watertight joint. You cannot mix jaw profiles of different manufacturers. There are common types of profiles used by several manufacturers which would give you the best flexibility across different pipe types. But there are also a lot of inndiviual company profiles so making sure you have the right jaws is key to a good joint.

U/TH– profile the Universal profile for MLC pipe systems for most MLC providers including Multipipe

M/V profile – Used for most copper press systems on the market

These cross-sections of the most popular jaws and they show the subtle differences across the profiles when they are pressed.
For a full list of profiles, Klauke has made a handy guide which shows which jaws can be used with each manufacturer.   Klauke Guide

A pressing matter – the difference in tool strength

The last consideration is the pressing strength of the tool. Most press tool manufacturers have a small and larger gun, but what exactly is the difference? The answer is that it’s mainly the strength of the hydraulic press.
Usually, the bigger the gun = the bigger the hydraulic press. Compact guns typically press up to 28/32mm pipes, with larger guns up to 108/110mm.
This means you need to consider what sizes you need to press. Some fitting manufacturers require specific press strengths for their systems, so be sure to factor this in. Our Multipipe MLC press system requires a 15KN press tool (Klauke MAP115) for sizes up to 32mm and 32KN press tool (Klauke UAP332) for up to 110mm pressing.



If you’ve any more questions about pressing tools, our technical team are always here to help you out. Get in touch with us

Follow us on social media to stay up to date with the latest industry trends, product offerings and more Tech Tuesday articles!