Multilayer Composite Pipe and Fittings Starter Kit

By merging modern, temperature resistant PE-RT with metal we form a new material as the basis of our advanced multilayer pipes.

Our high-grade materials provide an alternative piping solution to both copper and push-fit, delivering top quality results for both domestic and commercial projects.

  • Low Heat Expansion
    Performs similarly to metal pipes with fittings to suit any project
  • Easy to Form
    Easily bent by hand, stays in shape & keeps its form with no snapback
  • No Hot Works Needed
    No soldering needed meaning cleaner & safer installations that save time & money
  • WRAS Approved
    With no deposit build up or corrosion, MLCP is hygienic & ideal for transporting drinking water
  • Fewer connections
    Navigate bends & obstacles with ease versus copper, saving you time & money while reducing the potential for leaks

Get Started. Get Professional.

We understand you want a plumbing supplier you can trust and build a relationship with – someone who genuinely wants you to feel confident and proud of every installation. In a nutshell here’s why Multipipe MLCP is better than copper or pushfit.

  • Designed to last–  Multipipe’s MLCP system has been tested to have a design life of over 50 years. We’ve been supplying MLCP for use in both domestic and commercial installations for 20 years so you can be confident that we’ll be here for you long after the job has been installed.
  • Designed for inherent flexibility– the key to our MLCP system’s success is the pipework’s ability to form around corners and obstructions without adding fittings or connections. This feature is ideal when the pipework is installed within a wall, ceiling or under a floor.
  • Designed for speed- Installing Multipipe MLCP is fast and easy with just three steps. Cut the pipe, add the fitting and press the connection! Our MLCP does not need deburring or calibration and our superior design means that each connection can be completed in seconds.
  • Designed to make your life easier- our system is not only fast, efficient, safe and secure, we also offer complete project and installation support, including system design and training.

In the past year, we helped numerous installers to move to MLCP, resulting in faster, cleaner, more secure, and more profitable installations. Check out our library of helpful ‘how-to’ videos to see how easy it is to move to MLCP

If push-fit is holding you back, it's time to take your craft to the next level.
Make the move with Multipipe.

Is push-fit affecting your reputation?

Leaks. Breaks. What should be a quick installation can become an ongoing issue even quicker when using sub-quality push-fit piping.

Move away from “DIY” products and towards a professional alternative that will enhance your brand image.

Are you getting blamed when things go wrong?

Customers are quick to point the finger when things aren’t going their way, and your piping supplier will rarely be any help at all when piping fails. When others find fault, we offer training. As a Multipipe installer, we want you to have total confidence in the product and your skills.

Do you want to use more professional products?

You won’t find our products in DIY stores because we’ve designed Multipipe MLCP and tools to be used by professionals. This doesn’t mean they’re complicated to use; it means that we believe that professional tradespeople deserve high quality, professional products to enhance their reputation.

Increase your price point and reputation through superior products, expert training and unparalleled customer service from Multipipe.


Our Starter Kits

  • MLCP Starter Kit One
  • Tools and 16mm Pipe & Fittings Kit
Save Over
£230
£
Can be financed from just £7.88 per week

  • 1x 15KN Battery Pressing Hydraulic Tool, 10.8V, Charger & case
  • 1x 16mm [U-Profile] Jaw for 15KN Pressing Tool
  • 1x 16,20,25mm Bevelling Tool
  • 1x 16-20mm Guillotine Pipe Cutter
  • 1x 16mm Inner Bending spring
  • 1x 16mm Outer Bending spring
  • 1x 16x2mm MLC pipe 50m coil
  • 10x 16x16mm Coupling brass press-fit
  • 10x 16x16mm Elbow 90° brass press-fit
  • 10x 16x16x16mm Tee brass press-fit
  • 10x 16x1/2"FT Swivel Nut brass press fit
  • 10x 16x2 - Cu15mm Nut & Insert Adapter NP (2-piece)
  • 10x Push Fit Brass Stop End 16mm (Re-usable)
  • 1x Disconnecting Clip [for 16mm Push Fit Stop end 21-62516]
  • 10x 16x2 - Cu15mm compression adapter brass press-fit
  • 1x 16mm Pipe Clip [100 Pcs/bag]
Terms & Conditions Apply
  • MLCP Starter Kit Two
  • Starter Kit 1 Plus 25mm Kit
Save Over
£900
£
Can be financed from just £9.26 per week

  • 1x 15KN Battery Pressing Hydraulic Tool, 10.8V, Charger & case
  • 1x 16mm [U-Profile] Jaw for 15KN Pressing Tool
  • 1x 25mm [U-Profile] Jaw for 15KN Pressing Tool
  • 1x 16,20,25mm Bevelling Tool
  • 1x 16-20mm Guillotine Pipe Cutter
  • 1x 16mm Inner Bending spring
  • 1x 16mm Outer Bending spring
  • 1x 25mm Outer Bending spring
  • 1x 16x2mm MLC pipe 50m coil
  • 10x 16x16mm Coupling brass press-fit
  • 10x 16x16mm Elbow 90° brass press-fit
  • 10x 16x16x16mm Tee brass press-fit
  • 10x 16x1/2"FT Swivel Nut brass press fit
  • 10x 16x2 - Cu15mm Nut & Insert Adapter NP (2-piece)
  • 10x Push Fit Brass Stop End 16mm (Re-usable)
  • 1x Disconnecting Clip [for 16mm Push Fit Stop end 21-62516]
  • 10x 16x2 - Cu15mm compression adapter brass press-fit
  • 1x 16mm Pipe Clip [100 Pcs/bag]
  • 1x 25x2.5mm MLC pipe 50m coil
  • 5x 25x25mm Coupling brass press-fit
  • 5x 25x16mm Reduced Coupling brass press-fit
  • 10x 25x25mm Elbow 90° brass press-fit
  • 4x 25x25x25mm Tee brass press-fit
  • 4x 25x16x25mm Reducing Tee brass press-fit
  • 5x 25x2.5 - Cu22mm Copper Spigot adapter press-fit
  • 5x 25x2.5 x Cu22mm compression adapter brass press-fit
  • 5x 25x3/4" MT Connection brass press-fit
Terms & Conditions Apply
Tool Finance Scheme - from only £7.88 per week
We can put you in touch with a tool financing scheme, making it easier than ever to get the tools you need in a financially viable way.
Finance available up to £20,000
Speak to our team when you register for your MLCP Starter kit.
Available Now
Brilliant pro active company. Quick turn around on Quotes. Very helpful pleasure to deal with.
Andy Brown, Installer
I’ve always found the team at Multipipe to be informative and quick to respond. The costs to be some of the most fair in the market in comparison to other products and delivery second to none. The fittings are of the highest standard. I’ve committed all my purchasing of mlcp and ufh products to Multipipe and will continue to.
Nathan Whitfield, Installer
How - To - Videos
A collection of videos to help you make the most of Multipipe products
Technical Support
Our team are here to answer any technical queries you might have
Resources
Price guides and technical datasheets to installation guides designed to make life easy
Need Help?
Call Us On 01245 227630 Mon-Fri 8:30am-5pm
Friendly, expert advice when you need it