Underfloor Heating
Our range of UFH systems will suit every type of building from retrofit home improvements to new constructions, compatible with renewable energy sources and traditional systems.
-
- COMFORT
- Radiant heat from the floor provides a more pleasant indoor environment
-
- MORE SPACE
- Don't compromise on room layout, with no floor space lost to radiators
-
- HYGIENIC
- No hard to clean bacteria and dust collectors, making UFH ideal for health care
-
- ZONE CONTROL
- Control each room by thermostat to save on heating bills & wasted energy
Why choose Multipipe for UFH?
We’ve been supplying bespoke UFH solutions for luxury homes and commercial projects for over 20 years. Our expert technical design team will ensure the system is optimised for your installation leading to energy efficiency and customer satisfaction.
How can Multipipe UFH benefit me?
-
Designed to make your life easier
-
Our system is not only fast, efficient, safe and secure, we also offer complete project and installation support, including system design and training
-
Designed to last
-
Multipipe's MLCP system has been tested to have a design life of over 50 years
-
Modern Technology
-
Our UFH is compatible with renewable energy sources and works with smart devices to remotely control room temperatures
Multipipe UFH Systems
-
Altis Flow
A low profile flowing screed system of 18mm, using 12mm pipe in a castellated panel. This fast & easy to install system can be directly tiled on and is quick to react offering a high heat output.
Read the install guide here
Features & Benefits
- Allows for pipe laying in Bifilar and Meander patterns
- Variable pipe centres can be used
- Easy to cut panel for customisation
- Only 18mm build height
- Great thermal output at low temperature
- Strong self-bonding panel (no need for adhesives)
- Compatible with 12mm pipe
-
Altis Dry
A Gypsum based board routed with 12mm grooves. Suitable for direct tiling or application of a levelling compound giving high outputs. With no need for wet screed, your project can be completed quicker..
Features & Benefits
- Designed for 12mm pipe at 150mm centres
- Ideal for both new build and retrofit
- Good for large regular shaped areas
- Quick installation and direct laying of tiles
- (W x L x D) 800mm x 600mm x 18mm
- Direct laying (no drying times)
- Fast heat up times
-
Fortis Pro
A premium grade EPS board with an impressive 400 kPa compressive strength. This dense polystyrene board can have floor coverings directly laid on top, including tiles and wood. Finished with a 200-micron thick foil, this helps spread the heat out and being a foil helps to make cutting the boards easier.
Read the install guide here
Features & Benefits
- Lightweight, easy to lay
- Can be directly tiled
- Close pipe centres for increased output
- Can accept levelling compound on top
- High-density polystyrene sheet (400kPa)
- Pre-routed routes for 16mm pipe
- All-in-one panel design (no feed and return panels)
-
Fortis Lite
Specification as per Fortis Pro but for use with 12mm MLCP and an unbonded system weight of 1.8kg/m2
Read the install guide here
Features & Benefits
- Lightweight, easy to lay
- Can be directly tiled
- Close pipe centres for increased output
- Can accept levelling compound on top
- High-density polystyrene sheet (400kPa)
- Pre-routed routes for 12mm pipe
- All-in-one panel design (no feed and return panels)
-
Fortis Eco
A high density routed bare polystyrene board for use with 16mm MLCP. The standard product has 25mm thickness & a system weight of 1.4kg/m2.
Features & Benefits
- Variable pipe centres on request
- Variable thicknesses on request
- Pre-routed routes for 16mm pipe
- 1200 x 1200mm sheet size
- Easy to cut 45 micron foil fully applied
- All-in-one panel design (no feed and return panels)
- EPS 100
-
Fortis Timber
For the easy installation of a wet UFH system on any type of timber suspended structure. Quick & easy to install with no extra adhesive substances needed.
Read the install guide here
Features & Benefits
- Quick reaction to temperature regulation
- Moisture grade chipboard (P5/P6)
- Pre-routed board to 200mm centres
- Twin groove HEP to increase outputs
- Tongue and groove on all four sides (system board only)
-
Solid Screed
Solid Screed UFH systems are the most common type of UFH system. Pipework is directly stapled to the insulation board of the main construction. Then a 4:1 sand cement screed (typically) is added but specialist screeds can be used to lower the construction height. All insulation should be fitted in line with part L of the building regulations or at least to BS EN 1264 standard of 1.25m² kW.
Features & Benefits
- Edge insulation incorporates an apron for flowing screed use
- MLC pipe allows for easier and better quality installs
- Low capital cost
- Variable pipe centres for low temperature systems
- High thermal comfort
-
Heat Plate
Heat plate is a pre-grooved aluminium spreader plate designed for timber suspended floor to make for a cost-effective method of installing pipe in a timber floor. Thanks to its embedded profile, floor heights are not raised and a typical structural floor can be used on top.
Features & Benefits
- 0.5mm thick aluminium plate for good heat transfer
- Unique profile ensures good pipe holding
- Can be easily tacked into place
- Ideal for use with 16mm PE-RT/PE-X pipes
- Custom size and centres available
-
Altis Resimat 5
Altis Resimat 5 is a thin and robust resilient layer, primarily used in under screed applications to isolate the screed from the sub-floor and flanking walls acoustically.
Features & Benefits
- 0.5mm thick aluminium plate for good heat transfer
- Unique profile ensures good pipe holding
- Can be easily tacked into place
- Ideal for use with 16mm PE-RT/PE-X pipes
- Custom size and centres available